About Us
Welcome to Sambhavi Control & Automations
From the last two decades, AC drive or VFD or simply frequency converter has become very much integral part for all segments of industries. This is for the reason of numerous benefits or advantages associated with it like smooth start, and wide flexibility in speed control apart from energy saving.
But since then many brand or make have mushroomed in the market ready to cater the need of
the customer.
This has spurred the need for a company or an organization which could
equally handle or undertake the sale as well service for all contemporary brand for all application with equal deftness.
There comes M/S Sambhavi Control & Automation, in India into existence in the year 2004, located in Meerut (UP) near to Delhi.
It has been initiated by a well qualified and trained engineer having gained expertise in VFD of all sorts for all application. Since then it is well managed by a group of well trained engineers.
Our basic purpose or motive is to provide all the technical help or solution to the customer in the need with regard to its sales and after -sales under one roof only .
This gives the ease and convenience in the view point of customer for the reason of pricing and other compatibility
and suitable factor.
The story does not end here . Promptness and alacrity in attaining the sales after service to the customer in the need for any brand of VFD has been always appreciated with wide recognition by
one and all.
This implies that you will get sale and service support for any brand of VFD
for your simplicity .
Not to mention. most important factor about
ourselves without any rhetoric is that of honesty, sincerity &
accountability towards customer which is conspicuously missing from
other supplier in the prevalent market having cut-throat
competition.
But this claim could be substantiated only when given
an opportunity or chance to serve you.
AC Drives
Mainly our concentration is towards VFD of all range and all make i,e Yasakawa, ABB, Danfoss ,Delta, Fuji , Mitsubishi, K-verter etc .
Never to underestimate, we also carry out complete automation solutions in industry with the help of PLC, SCADA , HMI etc .
Our understanding and skill in automation in sugar industry is far innovative than any body else .
Apart from it, we also manufacture and supply the following electrical and specific electronics items.
Electronics item
1) VFD or AC drive of ABB, Yasakawa, Mitsubishi, Fuji, Toshiba etc.
2)RPM Transmitter for sugar industry
3)Conductivity transmitter for sugar industry
4)Doneelly chut level transmitter for sugar industry
5)e- transmission or wireless system for any concerned data to mobile or PC
Electrical item
1) LT panel i,e MCC or PCC panel
2) Distribution panel
3) Automatic Power Factor Control (APFC) panel.
E-Transmitter: This has been
ingeniously developed by us .It e-transmits any desired data or
information at the factory’s site to any mobile or computer. This
help the person in charge to keep track of their quantitative
information related to their production or process control at the
site or works .
N.B. Moreover we can have gained full expertise in
developing any type of electronics products or system as per the
need and requirement of the customer.
Conductivity Transmitter
This is micro-controller based Conductivity transmitter with auto cleaning facility.
There is 2 relay used for auto cleaning purpose. One for water ON and other for actuator ON for 10 second and so on. In this instrument, user can set auto clean cyclic timer from 0000- 9999 minutes . At the time of auto cleaning, the instrument hold last process value during the cleaning. It is field programmable. Hence user can calibrate through calbi Low and calbi high parameter.
SPECIFICATION
•
• Output (Analog) : 4-20mA non isolated
• Control Relay : one pair normally open potential free contact @ 5A at 240v AC
• Senor : Conductivity Electrode
• Operating temp. : 0 dec. – 50 dec
• Overall size : 72x72x120 mm (HWD )
Application: It is used for Pan Boiling and feeding in sugar factories
Donnelly Chute level transmitter
The instrument is field programmable and very much user
friendly.
Here the user can set sensor sensitivity ,sensor level selection ,sample delay time and
relay set point etc. The user can also set level 2-10 to tune for o/p 4-20 mA and 0-100% display
.
The Instrument read input level in sequence 1 to 10.
. SPECIFICATION
•
• O/P (Analog) : isolated 4-20mA
• O/p (digital : optical digital output (op1 to op10)
• Relay set value : 000-100 settable
• Display range : according select sensor level (2-10) settable
• Time delay setting : 001-100 ms settable
• Input : Probe sensor (digital i/p)
• Digital i/p / o/p : Indicate by LED as fitted on the front panel
• Control Relay : one pair normally open potential free contact : @ 5A at 240v AC
• Overall size : 92x192x220 mm (WxHxD )
• Panel cutout : 184X90mm(WxH)
Application: It is
used for Donnelly Chute
level measuring and controlling in
sugar factories.
Digital RPM transmitter
This is micro-controller based RPM transmitter with 2 relay control output.
It is designed for settable teeth or pulse(1-99) of PNP/NPN type photo sensor or proximity sensor input.
Here user can adjust range parameter for required re-transmission output (4-20mA).
SPECIFICATION
•
•
• Heat or cool function : settable
• Output (Analog) : 4-20mA
• Control Relay :One pair normally open potential free contact :
@ 5A at 240v AC
• Sensor : PNP-NO/NC or NPN-NO/NC proximity switch
• Operating temp. : 0 dec. – 50 dec
• Overall size : 72x72x120 mm (HWD )
• Panel cutout : 67X67mm(WXH)
